Thermal Issues of Warm and Cool White LED Bulbs
##plugins.themes.academic_pro.article.main##
Abstract
For modern high-power LEDs, self-heating becomes a critical factor determining their functional characteristics and lifetime. For large-area LEDs with a complex structure, it is important to know not only the thermal resistance but also the detailed temperature distribution (temperature map) over the active area. In this paper, we present the thermal analysis of high-power Light-Emitting Diodes (LEDs) with under the real operating conditions. Thermal transient measurements were performed to study the thermal characteristics of high power LED bulbs. The purpose of this test is to analyze the heat dissipation from LED Lamps. The study concludes that the warm white LED bulbs show better thermal behavior than the cool white LED bulbs of low power.
##plugins.themes.academic_pro.article.details##
How to Cite
Jeykishan Kumar, K., Bharath Kumar, G., & Sudhir Kumar, R. (2019). Thermal Issues of Warm and Cool White LED Bulbs. Power Research - A Journal of CPRI, 58–63. https://doi.org/10.33686/pwj.v15i1.148101
References
- Jang SH, Shin MW. Thermal analysis of high power LEDs at working conditions. 18th IEEE International Symposium on the Physical and Failure Analysis of Integrated Circuits (IPFA); 2011. https://doi.org/10.1109/IPFA.2011.5992721
- Tang H, Li D, Pan M, Yang T, Yuan C, Fan X. Thermal analysis and optimization design of LED streetlight module. 2013 10th China International Forum on Solid State Lighting (ChinaSSL); 2013. https://doi.org/10.1109/SSLCHINA.2013.7177346
- Badalan N, Svasta P. Analysis of LEDs thermal properties. 2016 IEEE 22nd International Symposium for Design and Technology in Electronic Packaging (SIITME); 2016. https://doi.org/10.1109/SIITME.2016.7777267
- Ma X, Wu L, Dai S, Bai K, Zhou B, Zheng Z. Thermal analysis for high-power LED down-light. 2011 International Conference on Electronics, Communications and Control (ICECC); 2011. https://doi.org/10.1109/ICECC.2011.6066674
- Yin C, Lee Y, Bailey C, Riches S, Cartwright C, Sharpe R, Orr H. Thermal Analysis of LEDs for Liquid Crystal Display’s Backlighting. 2007 8th International Conference on Electronic Packaging Technology; 2007. https://doi.org/10.1109/ICEPT.2007.4441413
- Cheng X, Liu X, Chen W, Lai W. Thermal analysis of light-emitting diodes based on photo-electro-thermal relationship. 2014 11th China International Forum on Solid State Lighting (SSLCHINA); 2014. https://doi.org/10.1109/SSLCHINA.2014.7127210
- Ye H, Koh S, Yuan CA, Zhang GQ. Thermal analysis of phosphor in high brightness LED. 2012 13th International Conference on Electronic Packaging Technology & High Density Packaging; 2012. https://doi.org/10.1109/ICEPTHDP.2012.6474899
- Jang S, Shin MW. Thermal analysis of LED arrays for automotive headlamp with a novel cooling system. IEEE Transactions on Device and Materials Reliability. 2008; 8(3):561–4. https://doi.org/10.1109/TDMR.2008.2002355
- Jang S, Shin MW. Thermal analysis of LED arrays for automotive headlamp with a novel cooling system. IEEE Transactions on Device and Materials Reliability. 2008; 8(3):561–4. https://doi.org/10.1109/TDMR.2008.2002355
- Luo X, Gan Z, Liu S, Cheng T, Xiong W. Thermal analysis of an 80 W light-emitting diode street lamp. IET Optoelectronics. 2007; 1(5):191–6. https://doi.org/10.1049/iet-opt:20070006
- Li J, Yang Q, Niu P, Jin L, Meng B, Li Y, Zhang X. Analysis of Thermal Field on Integrated LED Light Source Based on COMSOL Multi-physics Finite Element Simulation. Physics Procedia. 2011; 22:150–6. https://doi.org/10.1016/j.phpro.2011.11.024