Estimation of induction motor parameters: an overview
##plugins.themes.academic_pro.article.main##
Abstract
##plugins.themes.academic_pro.article.details##
References
- J Holtz and J Quan., “Sensorless vector control of induction motors at very low speed using a nonlinear inverter model and parameter identification”, Proc. IEEE-IAS Annu. Meeting 2001, pp. 2614–2621.
- L A S de Ribeiro, C B Jacobina, A M N Lima, and A C Oliveira, “Parameter sensitivity of MRAC models employed in ifo controlled ac motor drive”, IEEE Trans. Ind. Electron.,1997,Vol. 44, pp. 536–545.
- F Ponci, L Cristaldi, M Faifer, and M Lazzaroni, “Innovative approach to early fault detection for induction motors”, 2007, Proc. IEEE Sdemped, pp. 283–288.
- M Benbouzid, “A review of induction motors signature analysis as a medium for faults detection”, IEEE Trans. Ind. Electron., 2000, Vol. 47, no. 5, pp. 984–993, Oct.
- P M de la Barrera, G R Bossio, G O Garcia, and J. A. Solsona, “Stator core fault diagnosis for induction motors based on parameters adaptation”, Proc. IEEE SDEMPED, 2009, pp. 1–6.
- M Vélez-Reyes, K Minami, and G C Verghese., “Recursive speed and parameter estimation for induction machines”, Proc. IEEE-IAS Annu.Meeting,1989, pp. 607– 611.
- J Stephan, M Bodson, and J Chiasson, “Real-time estimation of the parameters and fluxes of induction motors”, IEEE Trans. Ind. Applicat., 1994, Vol. 30, pp. 746–759.
- B K Bose, M G Simoes, D Crecelius, K Rajashekara, and R Martin, “Speed sensorless hybrid vector controlled induction motor drive”, Proc. IEEE-IAS Annu. Meeting, 1995, pp. 137–143.
- M L Cava, C Picardi, and F Ranieri., “Application of the extended Kalman filter to parameter and state estimation of induction motors”, Int. J. Model. Simul.,1989,Vol. 9, no. 3, pp. 85–89.
- D J Atkinson, P Acarney, and J Finch, “Observers for induction motor state and parameter estimation”, IEEE Trans. Ind. Appl.,1991,Vol. 27, no. 6, pp. 1119–1127.
- S Wade, M Dunnigan, and B Williams, “A new method of rotor resistance estimation for vector-controlled induction machines”, IEEETrans. Ind. Electron.,1997,Vol. 44, no. 2, pp. 247–257.
- ELevi, “Impact of iron loss on behaviour of vector controlled induction machines”, IEEE Trans. Ind. Applicat., 1995, Vol. 31, pp. 1287–1296.
- M Globevnik, “Induction motor parameters measurement at standstill”, 1998, Proc. IEEE Ind. Electron. Soc. Annu. Meeting, pp. 280–285.
- M Ruff and H Grotstollen, “Identification of the saturated mutual inductance of an asynchronous motor at standstill by recursive least squares algorithm”, Proc. Europe. Conf. Power Electron. Applicat., 1993, Vol. 5, pp. 103–108.
- S I Moon and A Keyhani, “Estimation of induction machine parameters from standstill time-domain data”, IEEE Trans. Ind. Applicat., 1994, Vol. 30, pp. 1606– 1615.
- A Consoli, L Fortuna and A Gallo, “Induction motor identification by a microcomputer-based structure”, IEEE Trans. Ind. Electron,1987,Vol. IE-34, pp. 422–428.
- A Bünte and H Grotstollen, “Off line parameter identification of an inverter-fed induction motor at standstill”, BRIGHTON (ENE) Proc. Europe. Conf. Power Electron. Applicat.,1995, pp. 3.492–3.496.
- WH Kwon, C H Lee, K S Youn, and G H Cho, “Measurement of rotor time constant taking into account magnetizing flux in the induction motor”, Proc. IEEE Ind. Applicat. Soc. Annu. Meeting,1994, pp. 88–92.
- D E Borgard, G Olsson, and R D Lorenz “Accuracy issues for parameter estimation of field oriented induction machine drives”, IEEE Trans.Ind. Applicat., 1995,Vol. 31, pp. 795–801.
- M Bertoluzzo, G S Buja., and R Menis, “Inverter voltage drop-free recursive leastsquares parameter identification of a PWM inverter-fed induction motor at standstill”, in Proc. IEEE Int. Symp. Ind. Electron., 1997, pp. 649–654.
- T Matsuo and T A Lipo, “A rotor parameter identification scheme for vector controlled induction motor drives”, IEEE Trans. Ind. Applicat., 1985, Vol. IA-21, pp. 624–632.
- L Loronand G Laliberté., “Application of the extended Kalman filter to parameters estimation of induction motors”, Proc. Europe. Conf. Power Electron. Applicat., 1993, Vol. 5, pp. 85–90.
- C Zai, C Marcoand T Lipo, “An extended Kalman filter approach to rotor time constant measurement in PWM induction motor drives”, IEEE Trans. Ind. Appl., 1992, Vol. 28, no. 6, pp. 96–104.
- J W Finch, D J Atkinson, and P P Acarnley, “Full-order estimator for induction motor states and parameters”, Proc. Inst. Elect. Eng. Elect. Power Applicat., 1998, Vol. 145, no. 3, pp. 169–179.
- T Kataoka, S Toda, and Y Sato, “On-line estimation of induction motor parameters by extended Kalman filter”, Proc. Europe. Conf. Power Electron. Applicat., 1993, Vol. 4, pp. 325–329.
- R Krishnan and P Pillay, “Sensitivity analysis and comparison of parameter compensation schemes in vector controlled induction motor drives”, Proc. IEEE Ind. Applicat. Soc. Annu. Meeting,1986, pp. 155–161.
- H Toliyat, M S Arefeen, K M Rahman, and M Ehsani, “Rotor time constant updating scheme for a rotor flux oriented induction motor drive”, IEEE Trans. Power Electron., 1999,Vol. 14, pp. 850–857,
- E Akin, H B Ertan, and M Y Uctug, “A method for stator resistance measurement suitable for vector control”, Proc. IEEE Ind. Electron.Soc. Annu. Meeting,1994, pp. 2122-–2126.
- L Umanand and S Bhat, “Online estimation of stator resistance of an induction motor for speed control applications”, IEE Proc. Electr. Power Appl., 1995,Vol. 142, pp. 97– 103, Mar.
- Koubaa Yassine.,"Recursive identification of induction motor parameters", Simulation Modelling Practice and Theory 12, pp. 363– 381.
- R Kumar Saravana, K Kumar Vinoth, K KRay., "Fuzzy Logic based fault detection in induction machines using Lab view", IJCSNS International Journal of Computer Science and Network Security, 2009, Vol. 9 No. 9.
- H A Toliyat, E Levi, and M Raina, “A review of RFO induction motor parameter estimation techniques”, IEEE Trans. Energy Convers., 2003, Vol. 18, no. 2, pp. 271–283, Jun.
- F Loser and P Sattler, “Identification and compensation of the rotor temperature of AC drives by an observer”, Conf. Rec. IEEE IAS Annu. Meeting,1984, pp. 532–537.
- S G Tzafestas and K C Zikidis, “Neuro FAST: On-line neuro-fuzzy ART-based structure and parameter learning TSK model”, IEEE Trans.Syst., Man Cybern. B, 2001, Vol. 31, pp. 797–802.
- M N Uddin, T S Radwan, and M A Rahman, “Performances of fuzzy-logic-based indirect vector control for induction motor drive”, IEEE Trans. Ind. Appl,2002,Vol. 38, no. 5, pp. 1219–1225.
- M N Uddin, M A Abido, and M A Rahman, “Development and implementation of a hybrid intelligent controller for interior permanent magnet synchronous motor drive”, IEEE Trans. Ind. Appl., Vol. 40, no.1, pp. 68–76.
- A Consoli, E Cerruto, A Raciti, and A Testa, “Adaptive vector control of induction motor drives based on a neuro-fuzzy approach”, Proc. IEEE PESC, 2004, pp. 225–232.
- Treetrong Juggrapong, "Induction Motor Fault Detection Based on Parameter Identification Using Genetic Algorithm", The Journal of KMUTNB., 2010, Vol. 20.
- T Phumiphak, and Chat-uthai, "Estimation of Induction Motor Parameters Based on Field Test Coupled with Genetic Algorithm", Power System Technology, Proceedings, International Conference IEEE, 2002, Vol.2, pp.1199 – 1203.
- J Holtz, “Sensorless control of induction machines — With or without signal injection?”, IEE Trans. Ind. Electron., 2006, Vol. 53, no. 1, pp. 7–30.
- D Telford, M W Dunnigam, and B W Williams, “Online identification of induction machine electrical parameters for vector control loop tuning”, IEEE Trans. Ind. Electron., 2003, Vol. 50, no. 2, pp. 253–261.