Studies and Analysis of Effects of Shading on the Performance of a Solar-Photovoltaic System

##plugins.themes.academic_pro.article.sidebar##

Published Mar 2, 2014
Download
PDF
Statistic

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...
Volume 10, Issue 1, March 2014

##plugins.themes.academic_pro.article.main##

Neha Adhikari
Engineering Officer Grade-3, Energy Efficiency and Renewable Energy Division, CPRI, Bangalore-560080
Vikas Pratap Singh
Energy Efficiency and Renewable Energy Division, Central Power Research Institute, Bangalore-560080

Abstract

This paper presents the studies on the solar photovoltaic system in the partial shading conditions. The standalone solar photovoltaic system for residential application of 2 kW power rating is considered in the system analysis. The proposed system is using a set of batteries for energy storage with a flyback dc-dc converter and a single phase voltage source inverter is designed with the controller to regulate the power quality at the consumer end. The studies are carried out as case studies on the different conditions of the shading and results are presented to analyze the PV output power and evaluate the overall system performance. Based on the results obtained few measures are suggested to keep the check on the performance in such conditions.

##plugins.themes.academic_pro.article.details##

How to Cite
Adhikari, N., & Pratap Singh, V. (2014). Studies and Analysis of Effects of Shading on the Performance of a Solar-Photovoltaic System. Power Research - A Journal of CPRI, 137–146. Retrieved from https://cprijournal.in/index.php/pr/article/view/846

References

  1. H. Patel and V. Agarwal, "Maximum Power Point Tracking Scheme for PV Systems Operating Under Partially Shaded Conditions," IEEE Tranasction on Industrial Electronics, Vol. 55, No. 4, pp. 1689-1698, April 2008.
  2. C. Deline, J. Meydbrey, M. Donovan and J. Forrest, "Photovoltaic Shading Testbed for Module-Level Power Electronics," NREL Technical Report NRELTP-5200-54876.
  3. Benavides, N. D and P. L. Chapman, Modeling the Effect of Voltage Ripple on the Power Output of Photovoltaic Modules., IEEE Transactions onIndustrial Electronics, Vol. 55, No. 7, pp. 2638-2643, 2008.
  4. De Soto, W., S. Klein, and W. Beckman, Improvement and validation of a model for photovoltaic array performance, Journal of Solar Energy, Vol. 80, No. 1, pp. 78-88, 2008.
  5. T. Noguchi , S. Togashi and R. Nakamoto "Short-current pulse-based maximumpowerpoint tracking method for multiple photovoltaic and converter module system", IEEE Transaction on Industrial Electronics, Vol. 49, No. 1, pp.217 -, 2002.
  6. E. V. Solodovnik , S. Liu and R. A. Dougal "Power controller design for maximum power tracking in solar installations", IEEE Transaction on Power Electronics, Vol. 19, No. 5, pp.1295 -1304, 2004.
  7. Y oung-HyokJi, Doo-Yong Jung, ChungYuen Won, Byoung-Kuk Lee, Jin-Wook Kim , "Maximum power point tracking method for PV array under partially shaded condition," Energy Conversion Congress and Exposition, 2009. ECCE 2009. pp.307312, 20-24 Sept. 2009.
  8. K. Kobayashi , I. Takano and Y. Sawada "A study on a two stage maximum power point tracking control of a photovoltaic system under partially shaded insolation conditions", Proc. of IEEE Power Engineering Society General Meeting, pp.2612 -2617 2003.
  9. Michael Jensen, Russell louie, Mehdi Etezadi and M.Samifadali, "Model and Simulation of 75kW PV Solar Array", IEEE Transmission and Distribution Conference and Exposition, April 2010, New Orleans, LA , USA .
  10. Masoum, Ali S.Padovan, Frank Masoum, Mohammad A.S. "Impact of partial shading on voltage- and current-based maximum power point tracking of solar modules," 2010 IEEE Power and Energy Society General Meeting, pp.1-5, 25-29 July 2010.
  11. K. Zhang, T. X.Wu, H.Hu, Z. Qian, F.Chen, K.Rustom, N.Kutkut, J.Shen and I.Batarseh, "Analysis and design of distributed transformers for solar power conversion," 2011 IEEE Applied Power Electronics Conference and Exposition (APEC), pp.1692-1697, 6-11 March 2011.
  12. Q. Li and P. Wolfs, "A review of the single phase photovoltaic module integrated converter topologies with three different DC link configurations," IEEE Transactionon Power Electronics, Vol. 23, No. 3, pp. 13201333, May 2008.
  13. M. Jain, M. Daniele, and P. K. Jain, "A bidirectional DC-DC converter topology for low power application," IEEE Transaction on Power Electronics, Vol. 15, No. 4, pp. 595-606, Jul. 2000.
  14. Linear Techonology Application Notes Datasheet of Isolated Flyback Converter Without an Opto-Coupler, http://cds.linear.com/docs/Datasheet/3574f
  15. Abdel Rahim Naser M andQuaicoe John E, “Analysis and design of a multiple feedback loop control strategy for singlephase voltage-source UPS inverters,” IEEE Transactions on Power Electronics, Vol. 11, No. 4, pp. 532-541, July 1996.
  16. Tzann-Shin Lee, S. J. Chiang, and JhyMing Chang, "Loop-shaping controller designs for the single-phase UPS inverters," IEEE Trans. Power Electon., Vol. 16, No. 4, pp. 473-481, 2001.
  17. Hua C. "Two-level switching pattern deadbeat DSP controlled PWM Inverter," IEEE Trans. Power Electronics, Vol. 10, No. 5, pp. 310-317, 1995

Most read articles by the same author(s)

1 2 > >>