On line gnn based induction motor parameter estimation
##plugins.themes.academic_pro.article.main##
Abstract
The induction motor is commonly used in industries due to its rugged construction and almost no maintenance. To precisely control the induction motor, accurate estimation of parameters is required. Artificial Neural Network (ANN) is used in the past for parameter estimation. The conventional ANN has its own problems such as learning issues, unknown size of ANN and its connections, etc. To overcome some of its problems generalized neural network is used in this paper. The GNN is trained to estimate parameters of three phase induction motor. Experimental setup is developed in DEI, which is consisting of a 415 V, 3Φ squirrel cage induction motor, data acquisition system and on-line parameter estimator.
##plugins.themes.academic_pro.article.details##
How to Cite
Chaturvedi, D. K., Pratap Singh, M., Sharif Iqbal, M., & Pratap Singh, V. (2015). On line gnn based induction motor parameter estimation. Power Research - A Journal of CPRI, 333–340. Retrieved from https://cprijournal.in/index.php/pr/article/view/729
References
- W Miroslaw, Krzeminski Zbigniew, and Toliyat Hamid A., IEEE transactions on industrial electronics Neural-NetworkBased Parameter Estimations of Induction Motors, Vol. 55, No. 4, pp. 501-510, April, 2008.
- A Toliyat Hamid, Levi Emil, and Raina Mona, A Review of RFO Induction Motor Parameter Estimation Techniques, IEEE transactions on energy conversion, Vol. 18, No. 2, June, 2003.
- Bambang urwahyudi, Soebagio, and Ashari M., RNN Based Rotor Flux and Speed Estimation of Induction Motor, International Journal of Power Electronics and Drive System JPEDS), Vol. 1, No. 1, pp. 58-64 September, 2011.
- H A Toliyat and G H Hossein, “Parameter estimation algorithm using spectral analysis for vector controlled induction motor drives,” in Proc. IEEE Int. Symp. Ind. Electron, pp. 90-95.
- T Kataoka, S Toda, and Sato Y., “On-line estimation of induction motor parameters by extended Kalman filter”, Proc. Europe. Conf. Power Electron. Applicat., Vol. 4, pp. 325–329, 1993.
- L Umanand and S Bhat , “Online estimation of stator resistance of an induction motor for speed control applications”, IEE Proc. Electr. Power Appl., Vol. 142, pp. 97–103, March, 1995.
- K Yassine,,"Recursive identification of induction motor parameters", Simulation Modelling Practice and Theory 12 363–381, 2004.
- J Holtz, “Sensorless control of induction machines — With or without signal injection?” IEE Trans. Ind. Electron., Vol. 53, No. 1, pp. 0–30, Feb. 2006.
- D Telford, M W Dunnigam, and Williams, “Online identification of induction machine electrical parameters for vector control loop tuning”, IEEE Trans. Ind. Electron., Vol. 50, No. 2, pp. 253–261, Apr. 2003.
- H Nerkar Madhavi & B Kushare EITSI Transactions on Electrical and Electronics Engineering (ITSI-TEEE), NeuralNetwork-Based Parameter Estimations of Induction Motor. Vol. 1, Issue 2, pp. 23208945, 2013.
- D E Borgard, G Olsson, and R D Lorenz, “Accuracy issues for parameter estimation of field oriented induction machine drives”, IEEE Trans. Ind. Applicat., Vol. 31, pp. 795–801, July 1995.
- S N Vukosavic and M R Stojic, “On-line tuning of the rotor time constantfor vectorcontrolled induction motor in position control applications,” IEEE Trans. Ind. Electron., Vol. 40, pp. 130–138.,1993.
- S I Moonand and A Keyhani, “Estimation of induction machine parameters from standstill time-domain data”, IEEE Trans. Ind. Applicat., Vol. 30, pp. 1606–1615, Nov. / Dec.1994
- P S Bhimra, Gerneralized theory of Electrical Machine, Khanna Publishers, Delhi, chapter. No. 8, pp. 421-620 [15] P Vas , “Sensorless Vector and Direct Torque Control”. New York: Oxford Univ. Press, 1998.
- K Yassine, "Recursive identification of induction motor parameters", Simulation Modelling Practice and Theory 12 pp. 363– 381, 2004.
- D K Chaturvedi, “Soft computing techniques and its applications to electrical engineering”, Springer Verlag, Germany, 2008.