Development of Epoxy with Nano and Micro Fillers for Core Insulation of Composite Insulators
DOI:
https://doi.org/10.33686/pwj.v15i2.150407Keywords:
Epoxy Composites, Nano and Micro Fillers, Outdoor InsulatorsAbstract
Epoxy composites are extensively used in different applications in high voltage engineering. However, the use of these composites for outdoor insulators has been challenging due to complexities arising out of the conditions of operation of the insulators. Pollution performance of composite insulators is influenced by the nature of the pollution existing, in addition to the combination of stresses acting on the insulators. The use of nano and micro combination of fillers in the epoxy composites is an ideal choice for achieving a proper balance of electrical, thermal and mechanical properties. This paper considers the merits of using combination of micro and nano fillers in an epoxy matrix to demonstrate that such insulation systems would provide better alternatives to the conventional epoxy systems for use as central rod in composite insulation systems for severe contaminated conditions.Downloads
Metrics
Downloads
Published
How to Cite
Issue
Section
References
Liang M, Wong KL. Improving the long-term performance of composite insulators use nanocomposite: A review. Energy Procedia. 2017; 110:168–73. https://doi.org/10.1016/j.egypro.2017.03.123
Glushkov DA. Polymeric insulation: Advantages and disadvantages. Advanced Materials Research. 2014; 1008–9:615–19. https://doi.org/10.4028/www.scientific.net/AMR.1008-1009.615
Cech V, Palesch E, Lukes J. The glass fiber-polymer matrix interface/interphase characterized by nanoscale imaging techniques. Journal of Composites Science. 2013; 83:22–6. https://doi.org/10.1016/j.compscitech.2013.04.014
Cui H, Kessler MR. Pultruded glass fiber/bio-based polymer: Interface tailoring with silane coupling agent. Composites Part A. 2014; 65:83–90. https://doi.org/10.1016/j.compositesa.2014.05.021
Tanaka T, Kozako M. Proposal of a multi-core model for polymer nanocomposite dieletrics. IEEE Transactions on Dielectrics and Electrical Insulation. 2005; 4:669–81. https://doi.org/10.1109/TDEI.2005.1511092
Zheng Y, Zheng Y, Ning R. Effects of nanoparticles SiO2 on the performance of nanocomposites. Materials Letters. 2003; 57:2940–4. https://doi.org/10.1016/S0167577X(02)01401-5
Maity P, Kasisomayajula SV, Parameswaran V, Basu S, Gupta N. Improvement in surface degradation properties of polymer composites due to preprocessed nanometric alumina fillers. IEEE Transactions on Dielectrics and Electrical Insulation. 2008; 15:63–72. https://doi.org/10.1109/T-DEI.2008.4446737
Tanaka T, Montanari GC, Mulhaupt R. Polymer Nanocomposites as dielectrics and electrical insulation perspectives for processing technologies, Material characterization and future applications. IEEE Transactions on Dielectrics and Electrical Insulation. 2004; 11:763–84. https://doi.org/10.1109/TDEI.2004.1349782
Kurimoto M, Okubo H, Kato K, Hanai M, Hoshina Y, Takei M, Hayakawa N. Dielectric properties of epoxy/alumina nanocomposite influenced by control of micrometric agglomerates. IEEE Transactions on Dielectrics and Electrical Insulation. 2010; 17:662–70. https://doi.org/10.1109/TDEI.2010.5492236
Huang X, Zheng Y, Jiang P, Yin Y. Influence of nanoparticle surface treatment on the electrical properties of cycloaliphatic epoxy Nanocomposites. IEEE Transactions on Dielectrics and Electrical Insulation. 2010; 17:635–43. https://doi.org/10.1109/TDEI.2010.5448121
Suchitra M, Renukappa NM, Ranganathaiah C, Pasang T, Rajan JS. Moisture and filler induced effects on the dynamic mechanical properties of glass fiber reinforced epoxy hybrid composites. IEEE Transactions on Dielectrics and Electrical Insulation. 2016; 6:3631–40. https://doi.org/10.1109/TDEI.2016.005812
Imai T, Sawa F, Nakana T, Ozaki T, Shimizu T, Kozako M, Tanaka T. Effects of nano and micro filler mixture on electrical insulation properties of epoxy based composites. IEEE Transactions on Dielectrics and Electrical Insulation. 2006; 13:319–26. https://doi.org/10.1109/ TDEI.2006.1624276
Zulfli M, Bakar ANHA, Chow WS. Mechanical and thermal behaviors of glass fiber reinforced epoxy hybrid composites containing organo-montmorillonite clay. Malaysian Polymer Journal. 2012; 7:8–15.
Hameed N, Thomas SP, Abraham R, Thomas S. Morphology and contact angle studies of poly(styrene-co-acrylonitrile) modified epoxy resin blends and their glass fibre reinforced composites. eXPRESS Polymer Letters. 2007; 1:345–55. https://doi.org/10.3144/expresspolymlett.2007.49
Suchitra M, Renukappa NM. Thermal properties of glass fiber reinforced epoxy composites with and without fillers. Journal of Macromolecular Symposia. 2016; 361:117–22. https://doi.org/10.1002/masy.201400227
Sinayobye E, Mensah-Brown H, Yaya A, Kakane VCK, Baryeh EA. Calculation of interfacial tensions between Macromolecular solutions and soltrol-130 from contact angles measurements. ARPN Journal of Engineering and Applied Sciences. 2013; 8:99–104.
Suchitra M, Renukappa NM, Ranganathaiah C, Rajan JS. Correlation of free space length and surface energy of nano composites to surface tracking. IEEE Transactions on Dielectrics and Electrical Insulation. 2018; 25:2129–38. https://doi.org/10.1109/TDEI.2018.007194