Multi Source Bidirectional DC/DC Converter by Using PV-Wind-Battery based Integration for Domestic Applications

##plugins.themes.academic_pro.article.main##

Bandi Mallikarjuna Reddy
Satya Prakash

Abstract

Renewable energy sources are becoming more attractive due to their eco-friendly nature. As conventional energy sources are polluting environment, it has become imperative to shift to renewable energies. PV and wind are popular renewable sources because of their abundance availability and cost effectiveness. But, renewable do not being able to supply continuous power owe to intermittency of renewable sources. This issue can be addressed by efficiently integrating battery with renewable sources. The usual approach for this is to use dedicated single-input converters one for each source. In this, the sources are connected to a common dc bus. The special converters which are used for the integration purpose would not work properly due to renewable intermittency. The efficiency of integrated system would be decreased due to multiple power conversion stages. So, the major challenge is to decrease power conversion stages and hence losses of hybrid system. A control technique has been proposed in this work for tracking Maximum Power Point (MPP) of both wind turbine and photovoltaic array through adjusting the duty cycle ratios of switches used in converters under varying climatic conditions.

##plugins.themes.academic_pro.article.details##

How to Cite
Mallikarjuna Reddy, B., & Prakash, S. (2020). Multi Source Bidirectional DC/DC Converter by Using PV-Wind-Battery based Integration for Domestic Applications. Power Research - A Journal of CPRI, 95–103. https://doi.org/10.33686/pwj.v16i2.149753

References

  1. Giraud F, Salameh ZM. Steady-state performance of a grid-connected rooftop hybrid wind-photovoltaic power system with battery storage. IEEE Trans Energy Converters. 2008; 10(3):398-405.
  2. Valenciaga F, Puleston PF. Supervisor control for a standalone hybrid generation system using wind and photovoltaic energy. IEEE Trans Energy Converters. 2005; 20(2):398-405. https://doi.org/10.1109/TEC.2005.845524
  3. Liu C, Chau KT, Zhang X. An efficient wind-photovoltaic hybrid generation system using doubly excited permanent-magnet brush-less machine. IEEE Trans Ind Electron. 2010; 57(3):831-9. https://doi.org/10.1109/ TIE.2009.2022511
  4. Prakash S, Reddy BM. Techno-economic issues of grid connected large photovoltaic plants (A case study of 5 MW photovoltaic power plant at Prayagraj). Journal of Engineering Technology. ASEE publishers. 2019; 8(1):492- 505.
  5. Wai RJ, Lin CY, Chang YR. High step-up bidirectional isolated converter with two input power sources. IEEE Trans Ind Electron. 2009; 56(7):2629-43. https://doi.org/10.1109/ TIE.2009.2018427
  6. Chen YM, Liu YC, Hung SC, Cheng CS. Multi-input inverter for grid-connected hybrid PV/wind power system. IEEE Trans Power Electron. 2007; 22(3):1070 https://doi. org/10.1109/TPEL.2007.897117
  7. Wai RJ, Lin CY, Chang YR. High step-up bidirectional isolated converter with two input power sources. IEEE Trans Ind Electron. 2009; 56(7):2629-43. https://doi.org/10.1109/ TIE.2009.2018427
  8. Xu L, Ruan X, Mao C, Zhang B, Luo Y. An improved optimal sizing method for wind-solar-battery hybrid power system. IEEE Trans Sustain Energy. 2013; 4(3):774-85. https://doi. org/10.1109/TSTE.2012.2228509
  9. Chen YM, Cheng CS, Wu HC. Grid-connected hybrid PV/ wind power generation system with improved DC bus voltage regulation strategy. Proc 21st Annu IEEE Appl Power Electron Conf Expo (APEC); Texas, USA; 2006. p. 1088-94.
  10. Kim SK, Jeon JH, Cho CH, Ahn JB, Kwon SH. Dynamic modelling and control of a grid-connected hybrid generation system with versatile power transfer. IEEE Trans Ind Electron. 2008; 55(4):1677-88. https://doi.org/10.1109/ TIE.2007.907662
  11. Karthik DR, Reddy BM, Kushwaha SKS. A PSCAD simulation on integration of multi-level converters with DC-DC converter for AC drive applications. 2016 International Conference on Circuit, Power and Computing Technologies (ICCPCT); Nagercoil, India; 2016. p. 1-6. https://doi. org/10.1109/ICCPCT.2016.7530191
  12. Daniel SA, Ammasaigounden N. A novel hybrid isolated generating system based on PV fed inverter-assisted wind-driven induction generators. IEEE Trans Energy Convers. 2004 19(2):416-22. https://doi.org/10.1109/ TEC.2004.827031
  13. Reddy BM. Parametric analysis of the bidirectional soft switching DC/DC converter for the proton exchange membrane fuel cell hybrid electric vehicle. Power Research, CPRI Publishers. 2018 14(1). https://doi.org/10.33686/pwj. v14i1.142185
  14. Qian Z, Abdel-Rahman O, Batarseh I. An integrated fourport DC/DC converter for renewable energy applications. IEEE Trans Power Electron. 2010; 25(7):1877-87. https:// doi.org/10.1109/TPEL.2010.2043119
  15. Karthik DR, Reddy BM, Reddy PK. A ZVS PWM threephase current fed push-pull DC-DC converter in Microgrids. IJSETR. 2015; 4(8):2783-92.
  16. Nejabatkhah F, Danyali S, Hosseini SH, Sabahi M, Niapour SM. Modelling and control of a new three-input DC-DC boost converter for hybrid PV/FC/battery power system. IEEE Trans Power Electron. 2014; 27(5):2309-24. https:// doi.org/10.1109/TPEL.2011.2172465
  17. Chiang HC, Ma TT, Cheng YH, Chang JM, Chang WN. Design and implementation of a hybrid regenerative power system combining grid-tie and uninterruptible power supply functions. IET Renew Power generation. 2010; 4(1):85-99. https://doi.org/10.1049/iet-rpg.2009.0033
  18. Liu D, Li H. A ZVS bi-directional DC-DC converter for multiple energy storage elements. IEEE Trans Power Electron. 2006; 21(5):1513-7. https://doi.org/10.1109/ TPEL.2006.882450
  19. Chen YM, Liu YC, Wu FY. Multi-input DC/DC converter based on the multi-winding transformer for renewable energy applications. IEEE Trans Ind Appl. 2002; 38(4):1096-104. https://doi.org/10.1109/TIA.2002.800776
  20. Zhao C, Round SD, Kolar JW. An isolated three-port bidirectional DC-DC converter with decoupled power flow management. IEEE Trans Power Electron. 2008; 25(5):2443- 53. https://doi.org/10.1109/TPEL.2008.2002056
  21. Ouyang Z, Zhang Z, Andersen MAE, Thomsen OC. Four quadrants integrated transformers for dual-input isolated DC-DC converters. IEEE Trans Power Electron. 2012; 27(6):2697-702. https://doi.org/10.1109/ TPEL.2012.2186591
  22. Al-Atrash H, Tian F, Batarseh I. Tri-modal half-bridge converter topology for three-port interface. IEEE Trans Power Electron. 2007; 22(1):341-5. https://doi.org/10.1109/ TPEL.2006.889583
  23. Reddy BM, Narendra CH, Rambabu CH. A ZVS PWM three-phase current fed push-pull DC-DC converter with fuel cell input. IJSETR. 2014; 3(12):3449-54.
  24. Qian Z, Abdel-Rahman O, Al-Atrash H, Batarseh I. Modelling and control of three-port DC/DC converter interface for satellite applications. IEEE Trans Power Electron. 2010; 25(3):637-49. https://doi.org/10.1109/ TPEL.2009.2033926
  25. Karthik DR, Reddy BM, Singh SK, Ahmed A. Application of FPGA controller in multidevice interleaved boost converter for air craft electrical systems. ICPCIT-2016. Indian Journal of Science and Technology, SRM University, Chennai. 2016; 9(44):1-7. https://doi.org/10.17485/ijst/2016/v9i44/101925
  26. Mangu B, Akshatha S, Suryanarayana D, Fernandes BG. Grid-connected PV-wind-battery-based multi-input transformer-coupled bidirectional DC-DC converter for household applications. IEEE Journal. 2016; 4(3). https:// doi.org/10.1109/JESTPE.2016.2544789