High Temperature Erosion Resistance Characteristics of Boiler Tube Materials of Thermal Power Plant
##plugins.themes.academic_pro.article.main##
Abstract
##plugins.themes.academic_pro.article.details##
References
- Annual report on the Performance review of Thermal Power plants, Central Electricity Authority, Sewa Bhavan, New Delhi, 201112.
- S K Das, D Mandal, and K L Sahoo, Neural Modelling and Experimental Investigation of the Erosion Characteristics of Boiler Grade Steels Impacted by Fly Ash, Journal of Materials Engineering and Performance, Vol. 24, No. 9, pp. 3513-3526, 2015.
- S K Das, K M Godiwalla, S P Mehrotra, K K Sastry, P K Dey, Analytical model for erosion behaviour of impacted fly-ashparticles on coal-fired boiler components, Sadhana, Vol. 31, No. 5, pp. 583-95, 2006.
- S Nesic, Using computational fluid dynamics in combating erosion–corrosion, Chemical engineering science, Vol. 61, No.12, pp. 4086-97, 2006.
- A N Ingale, V C Pathade, and D V H Tatwawadi, Computational Fluid Dynamic analysis of Superheater in view of boiler tube leakage, International Journal of Engineering and Innovative Technology (IJEIT) Vol. 1, pp. 29-31, 2012.
- W Wojnar, Erosion of heat exchangers due to sootblowing, Engineering Failure Analysis, Vol. 33, pp. 473-489, 2013.
- R Suhas Bamrotwar, V S Deshpande, Root Cause Analysis and Economic Implication of Boiler Tube Failure in 210 MW Thermal Power Plant, Journal of Mechanical and Civil Engineering (IOSR-JMCE), Vol. 3, pp. 6-10, 2014.
- D Aquaro, Erosion rate of stainless steel due to the impact of solid particles, Proceedings of AITC-AIT International Conference on Tribology, 2006.
- E Huttunen-Saarivirta, M Antonov, R Veinthal, J Tuiremo, K Makela, & P Siitonen, Influence of particle impact conditions and temperature on erosion–oxidation of steels at elevated temperatures, Wear, Vol. 272, No.1, pp. 159-175, 2011.
- M Azad Sohail, A Ismail Mustafa and M Abdul Gafur, Boiler Tube Failure (BTFs) in Natural Circulation High Pressure Drum Boiler of a Power Station, Journal of Science and Industrial Research, Vol. 68, pp. 61-65, 2009.
- M Liebhard, A Levy, The effect of erodent particle characteristics on the erosion of metals. Wear, Vol. 151, No.2, pp. 381-390, 1991.
- P R Krishnamoorthy, S Seetharamu, and P Sampathkumaran, Influence of the mass flux and impact angle of the abrasive on the erosion resistance of materials used in pulverized fuel bends and other components in thermal power stations, Wear, Vol. 165, No.2, pp. 151-157 1993.
- Y I Oka, H Ohnogi, T Hosokawa, and M.Matsumura, The impact angle dependence of erosion damage caused by solid particle impact, Wear, Vol. 203, pp. 573-579, 1997.
- M M Rahman, J Purbolaksono, and J Ahmad, Root cause failure analysis of a divisional wall superheater tube of a coalfired power station, Engineering Failure Analysis, Vol. 17, No.6, pp. 1490-1494, 2010.
- M Antonov, R Veinthal, E HuttunenSaarivirta, I Hussainova, A Vallikivi, M Lelis, and J Priss, Effect of oxidation on erosive wear behaviour of boiler steels, Tribology International, Vol. 68, pp.35-44, 2013.
- G Sundararajan, and M Roy, Solid particle erosion behaviour of metallic materials at room and elevated temperatures, Tribology International, Vol. 30, No.5, pp. 339-359, 1997.
- J Jin, J Fan, X Zhang, and K Cen, Numerical simulation of the tube erosion resulted from particle impacts, Wear, Vol. 250, No.1, pp.114-119, 2001.
- Y Shida, H Fujikawa, Particle erosion behaviour of boiler tube materials at elevated temperature, Wear, Vol. 103, No.4, pp. 281-296, 1985.