Assessment of the Potential of Three Attritor-milled and Consolidated Nanostructured Materials for Sliding Wear-resistant Applications
##plugins.themes.academic_pro.article.main##
Abstract
##plugins.themes.academic_pro.article.details##
References
- R.W. Siegel and G.J. Thomas, "Grain boundaries in nanophase materials", Ultramicroscopy, Vol.40, 376-384, 1992.
- C.C. Koch, "Bulk behavior of nanostructured materials" in World Technology (WTEC) Panel Report on Nanostructure Science and Technology, September 1999, 94.
- C.E. Carlton and P.J. Ferreira, "What is behind the inverse Hall-Petch effect in nanocrystalline materials?",Acta Materialia, Vol. 55, 3749-3756 2007.
- K. Jia and T.E. Fischer, "Sliding wear of conventional and nanostructured cemented carbides", Wear, Vol. 203-204, 1997, 310318.
- D.C. Montgomery, "Design and Analysis of Experiments", 3rd edition, John Wiley, New York, 270 1991.
- R.W. Rydin, D. Maurice and T.H. Courtney, "Milling dynamics: Part 1. Attritor, result of a cinematographic study, Metallurgical and Materials Transactions, 24A, 175-185, 1993.
- K. Ramakrishnan, "Microstructure and properties of mechanical alloyed and equal channel angular extruded tungsten carbide", Doctor of Engineering dissertation, Lamar University, Beaumont, Texas, 2001.
- X. Kaculi, "Integration of mechanical alloying and equal channel angular extrusion for production of nanostructured materials", Doctor of Engineering dissertation, Lamar University, Beaumont, Texas, 2002.
- V. Mandakolathur, "Studies on mechanical alloying of titanium disilicide prior to chemical consolidation", Master of Engineering Science thesis, Lamar University, Beaumont, Texas, 2001.
- A. Parasiris, "Consolidation of WC-Co alloy by simple shear", M.S. Thesis, Texas A&M University, College Station,Texas, 1999.
- Metal Test Methods and Analytical procedures, 'Standard Test Method for Microhardness of Materials", Annual Book of ASTM Standards, 03.01, E 384-89, 400 1999.
- S.F. Bartram, "Crystallite size determination from line broadening and spotty patterns", in Handbook of X-rays for diffraction, emission, absorption and microscopy, E.F. Kaeble, ed., 17.1-17.6. 1967.
- S.N. Aripaka, "Mechano-chemical synthesis of titanium silicide using Allyl hydridopolycarbosilane as the chemical binder", Master of Engineering Science thesis, Lamar University, Beaumont, Texas, 2002.
- D. Gu, Y-C. Hagedorn, W. Meiners, K. Wissenbach and R. Poprawe, "Selective laser melting of in-situ TiC/Ti5Si3 composites with novel reinforcement architecture and elevated performance", Surface Coatings and Technology, Vol. 205, 3285-3292 2011.
- D. Gu, C. Hong and G. Meng, "Densification, microstructure and wear property of in situ titanium nitride-reinforced titanium silicide matrix composites prepared by a novel selective laser melting process", Metallurgical and Materials Transactions A, Vol. 43A, 697-708 2012.
- S.Sabooni, F. Karimzadeh and M.H. Abbasi, "Thermodynamic aspects of nanostructured Ti5Si3 formation during mechanical alloying and its characterization", Bulletin of Materials Science, Vol. 35, 439-447, 2012.