Wind Energy Conversion System for Rural Application

##plugins.themes.academic_pro.article.main##

M. Arjun
K. Uma Rao
R. A Deshpande

Abstract

This paper presents the use of induction generator with suitable control strategy for use as standalone wind energy conversion system. This may find application in remote rural areas where extension of 11 kV feeder may not be feasible due to physical terrain and where drawing of line may not be economically viable if loads are dispersed over wide area. This Induction machine is driven from a prim em over which is usually a wind turbine. The stator terminals of the induction machine is connected to a voltage source converter. The voltage source converter (VSC) is a three level diode clamped VSC. The terminals of the converter are connected to a capacitor and a battery. The battery is initially charged to 12 V and provides initial magnetisation for the Induction Generator. The terminals of the stator are also connected to an induction motor represented by RL load. Control strategy has been developed to keep the DC voltage constant irrespective of variation of load and rotor speeds. The total harmonic distortion in the line voltage of the induction machine is ensured to be within limits by employing three level converter. The proposed system is mathematically modelled using SIMULINK/MATLAB. The simulated results validate the theory studied.

##plugins.themes.academic_pro.article.details##

How to Cite
Arjun, M., Uma Rao, K., & Deshpande, R. A. (2014). Wind Energy Conversion System for Rural Application. Power Research - A Journal of CPRI, 175–182. Retrieved from https://cprijournal.in/index.php/pr/article/view/850

References

  1. M H Haque, “A Novel Method of Evaluating Performance Characteristics Of Self-Excited Induction Generators”, IEEE Transactions on energy Conversions, Vol 24.
  2. H. C. Rai and A. K. Tandon, “Voltage Regulation of SEIG Using Passive Elements”, 6thEuropean Conference on Electrical Machines and Drives, Vol. 1, No. 1, pp. 240245, 1983.
  3. M.B.Brennan and A.Abbondanti, “Static Excitation for Induction Gen- erator”, IEEE Transactions on Industry Applications, Vol. 13, No. 5, pp.422-428, Sept/Oct, 1977.
  4. N. H. Malik and A. H. Al-Bahrani, “Influence of the Terminal Capac- itor on the Performance Characteristics of SEIG”, IEE Proceedings of Institution of Electrical Engineering,Part C, Vol. 137, No. 2, pp. 168 173, March, 1990.
  5. S.-C.Kuo and L.Wang, “Analysis of voltage control for a self-excited in- duction generator using a current-controlled voltage source inverter (CC- VSl)”, IEE Proc.Genes. Transni.Distrib, Vol. 148, No. 5, September2001
  6. G. V. Jayaramaiah and B. G. Fernandes, “Dynamic Simulation of Three Phase Self-Excited Induction Generator With PWM-VSI”, National Conference on Control,Communication and Informations Systems, Vol. 1, No.1, pp. 132137, Jan, GOA, 2004.
  7. Mahmoud M. Amin, O. A. Mohammed, Fellow “DC-Bus Voltage Control of ThreePhase PWM Converters connected to Wind Powered Induction Generator”, 978-14244-6551-4/10.
  8. G. V. Jayaramaiah and B. G. Fernandes, “Novel Voltage Controller for Stand-alone Induction Generator using PWM-VSI”, IEEE Industry Applications Conference, pp. 204-208, Oct. 2006.
  9. KapilaBandara, TracySweet, Janaka Ekanayake, “Photovoltaic applica- tions for off-grid electrification using novel multi-level inverter technology with energy storage”, ELSEVIER-Renewable Energy 37,2012, pp.82-88.
  10. N.A. Rahim, J. Selvaraj, C. Krismadinata, “Five-level inverter with dual reference modulation technique for grid-connected PV system”, ELSEVIER-Renewable Energy 35, 2010, pp.712-720.
  11. ned Mohan, Tore M Undeland and William P Robbins, Power Converters Applications and Design, Third Edition, Wiley-India Edition
  12. Muhammad Rashid, Power Electronics Handbook, Academic Press 2001
  13. SeyedSaeedFazel, “Investigation and Comparison of multi level converters for medium voltage applications “, A Thesis submitted for the degree of Doctor of Philosophy, University of Berlin, July 2007.